Question: What Can I Use Instead Of A Miter Saw?

Do I really need a miter saw?

Miter saws are great for angles, trim, cross-cuts and are worthwhile to invest in if you plan on doing finish carpentry (molding, baseboards, etc).

If you HAVE to choose one, choose a circular saw.

If you can afford both, you’re all set!.

Can you use a circular saw instead of a miter saw?

You technically can cut angles with a circular saw but it would require setting up a jig or straight edge and having to measure the angle and then hope it’s right. With a miter saw you can adjust the angles in multiple directions.

What is the difference between a circular saw and a miter saw?

The Main Differences Between Miter Saws vs Circular Saws are: Miter Saws can cut more precisely, whereas Circular Saws have a handheld nature that allows the user to cut in a variety of angles and cuts. Miter Saws are quicker, whereas Circular Saws are generally less expensive.

Do I need a miter saw or table saw?

Table saws perform larger and longer cuts than miter saws. They help cut down larger materials, too. While miter saws sometimes come with extensions for the sides, a table saw does not require a larger blade to produce a longer cut. Some table saw and miter saw uses overlap.

Can a miter saw cut straight?

The most basic of miter saws (as in, not a chop saw,) offer straight cuts in a variety of angles. The cutting size is dependent on the blade size, but all miter saws can at least cut in 90° and 45° angles.

Can you put a table saw on a miter saw stand?

Yes—but don’t! Technically you can use a miter saw stand for a table saw, but whenever you’re using any power tool, it’s best to be extra cautious to avoid possible injury. Putting a table saw on a miter saw stand can be dangerous.

Can a miter saw cut a 4×4?

It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw. … A 12” miter saw clearly has a bigger blade. This means that it can do longer cuts faster as well as wider cuts.

Should I get a 10 or 12 miter saw?

The main differences between 10 inch vs 12-inch miter saw are: 10 inch spins faster, whereas the 12 inch miter saw is slower due to its heavy blade. 10 inch is cheaper due to its clear cut option, whereas 12 inch miter saw is more expensive because the blades have teeth and that increases the value of a saw.

What is the best miter saw for a beginner?

BEST OVERALL: DEWALT Miter Saw.BEST VALUE: Metabo HPT 12″ Sliding Compound Miter Saw.BEST FOR BEGINNERS: Metabo HPT 10″ Compound Miter Saw.BEST FOR PROS: DEWALT FLEXVOLT Double Bevel Compound Miter Saw.

Can you put miter saw on floor?

A miter saw can be used on the floor, but it may be challenging to hold the board you are cutting level and in place. You can always buy or build a miter saw stand so you won’t have a hard time to work with your miter saw on the floor.

Are miter saws dangerous?

►A miter saw can be hazardous when improperly used. Incidents could include electric shock, fire, or personal injury. ► The following general precautions should be observed by miter saw users: … Do not operate saw if blade guard does not move freely and close instantly.

Can a miter saw cut plywood?

For table and miter saws, invest in an 80 TPI plywood blade, one designed for cross (miter saw) or rip (table saw) cuts. Then when making your cuts, set yourself up for success. Your plywood should be oriented so that the blade exits the wood on the good face.

What are the three basic types of miter saws?

There are three main types of miter saws: standard, compound and sliding miter saws.Standard miters saws miter, or rotate to the side, so you can cut the board from the top at an angle. … Compound miter saws also bevel, or tilt, to allow you to cut your piece at different angles, both horizontally and vertically.More items…•